Home > About Us > Equipment > Godiva GP10/10 LP
Text only
GODIVA GP10/10 LP
The Godiva GP10/10 Model is a single stage, centrifugal pump powered by a Honda engine.
The pump suction tube, volute, discharge valves, manifold and impeller are all manufactured from corrosion-resisting aluminium alloy, while the pump shaft is of stainless steel.
The impeller is hydraulically balanced to reduce end-thrust and pump shaft-sealing is accomplished by a spring loaded, self adjusting, carbon faced gland running against a silicon-carbon counterface.
Optional extras fro the GP10/10 Pump are as follows:
1) TRV42 Thermal Relief Valve
2) Floodlight assembly.
3) Remote Fuel Tank and Hose Assembly - 23.7-litre capacity.
4) Wheelbarrow Assembly
5) Axle and 2 Wheel Assembly
ENGINE
The modified Honda engine is an in-line, vertical crankshaft, 3 cylinder, 4-stroke unit with a belt driven overhead camshaft and triple constant vacuum carburettors.
Engine capacity is 808cc with 70mm bore and stroke.
The aluminium pistons are used and the cylinder head is of heat-treated aluminium.
The electronic ignition system provides excellent starting characteristics and eliminates the need for any maintenance.
An electronic overspeed-and-engine protection system are also fitted. This actuates the event of high coolant temperature or low oil pressure by progressively reducing the engine speed to 2,800 r.p.m. until the problem is solved, then returning gradually to the set speed.